Gulf Coast CAD · Texas
From raw drone capture to machine-ready surface model — we handle the data, so you can move dirt.
TIN surface models for data collectors and machines. Ready for earthwork, grading and paving.
Cut/fill stakes, form nails, benchmarks and grade sets for civil earthwork and structures.
Elevation data, natural ground and progress tracking across the whole site.
Earthwork and material quantities, with the report to back the number.
RTK-corrected flight tied to ground control. One mobilization, whole site.
Dense cloud to clean ground surface — vegetation and noise stripped, breaklines where they matter.
Ground becomes a TIN surface your data collector and machines read directly.
Cut, fill and net quantities written up in a form you can bill and track against.
EXISTING
796.5 YD³
RTK-corrected capture processed into cut/fill-ready surfaces — matched to your grading plan, not a generic template. Fly the same site monthly and the surfaces stack, so progress is measured instead of estimated.
TIN
STATIONED
TIN surface models for data collectors and machines — corridors, intersections, pads and ponds, ready for earthwork, grading and paving. Exported in the format you already run, so nothing gets converted on your end.
STAKEOUT
GRADE SET
Cut/fill stakes, form nails, offsets, benchmarks and grade sets — set with GPS or total station. No flight required. Send the plans and we put the points in the ground, on your schedule.
DESIGN vs EXISTING
CUT / FILL / NET
Design surface dropped over captured existing ground gives you the real number before a machine moves. Earthwork and material quantities come back as a report you can bid from, check against, and hand to the owner.
Every aerial topography job includes a full cut/fill breakdown — surface-to-surface, grid-based, ready for review before a single machine moves. Fly it again next month and the same report shows exactly what moved.
Send the plans. You’ll get a number back, usually same day.